beautypg.com

Getting started, Page 3, What’s in the box – Blizzard Lighting The Puck 3NX (Rev A) User Manual

Page 3

background image

Page 3

The Puck 3NX Manual Rev. B

Copyright (c) 2011-2012 Blizzard Lighting, LLC

1. GETTING STARTED

What’s In The Box?

• 1 x Puck 3NX™ Flat LED PAR Fixture

• 1x Mounting Bracket & 2 Knobs

• 1x IEC Power Cord

• This Eloquently Written User Manual

Getting It Out Of The Box

Congratulations on purchasing the next generation of our best-selling fi xture

ever! We’ve completely redesigned the Puck3 to provide more output, more

reliability and more features, all at the same great price!

Now that you’ve got The Puck 3NX™ (or hopefully, Pucks!), you should care-

fully unpack the box and check the contents to ensure that all parts are present

and in good condition. If anything looks as if it has been damaged in transit,

notify the shipper immediately and keep the packing material for inspection.

Again, please save the carton and all packing materials. If a fi xture must be re-

turned to the factory, it is important that the fi xture be returned in the original

factory box and packing.

Powering Up!

All fi xtures must be powered directly off a switched circuit and cannot be run

off a rheostat (variable resistor) or dimmer circuit, even if the rheostat

or dimmer channel is used solely for a 0% to 100% switch.

AC Voltage Switch - Not all fi xtures have a voltage select switch, so please

verify that the fi xture you receive is suitable for your local power supply. See

the label on the fi xture or refer to the fi xture’s specifi cations chart for more

information. A fi xture’s listed current rating is its average current draw under

normal conditions. Check the fi xture or device carefully to make sure that if a

voltage selection switch exists that it is set to the correct line voltage you will

use.

Warning! Verify that the voltage select switch on your unit matches

the line voltage applied. Damage to your fi xture may result if the line

voltage applied does not match the voltage indicated on the voltage se-

lector switch. All fi xtures must be connected to circuits with a suitable

Ground (Earthing).

Getting A Hold Of Us

If something is wrong, just give us a call or send an email. We’ll be

happy to help, honest.

Blizzard Lighting

W220 N1531 Jericho Ct. Suite E, Waukesha, WI 53186 USA

[email protected]

www.blizzardlighting.com

866.493.6025