Blizzard Lighting FX SnowBlind (Rev B) - Manual (Page 12)

Page 12
SnowBlind™ FX Manual - Rev. B Copyright (c) 2013 Blizzard Lighting, LLC
4. OPERATING ADJUSTMENTS
The Control Panel
All the goodies and different modes possible with the SnowBlind™ FX are accessed by
using the control panel on the side of the fixture. There are 4 control buttons below the
LED display which allow you to navigate through the various control panel menus.
Is used to navigate the various modes.
Is used to enter into the selected mode setup.
Scrolls through menu items and numbers in ascending order.
Scrolls through menu items and numbers in descending order.
The Control Panel LED Display shows the menu items listed on the Control Panel Menu
Structure below. Pushing the button repeatedly will scroll through the menu
settings. To edit one, push the button. Then use the and
buttons to scroll through your choices (if applicable). Push the mode button to confirm.
Control Panel Menu Structure
d -- 001 - 255
DMX Starting Address
CON 000 - 255
Brightness Adjustment (0% <-->100%)
Pro Pr.1 - Pr.4
Built-in programs 1-4
SP.1 - SP.9
Speed Adjustment (Slow <--> Fast)
AUT
Sets the Fixture to Auto Mode
SP.1 - SP.9
Speed Adjustment (Slow <--> Fast)
Sd1
Sound Active Mode 1
Sd 2
Sound Active Mode 2
SLA
Sets the Fixture to Slave Mode
NOTE: If buttons are not pressed within 20 seconds, the LED display will shut off.
Mode Setup doWN up