Blizzard Lighting 5 SkyBox (Rev A) - Manual (Page 14)

Page 14
SkyBox™ 5 User Manual Rev. A © 2014 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
Tip: Push the
Set the Starting DMX Address:
The default mode for the fixture is DMX, so the first menu item that you can edit is the
starting DMX address.
1.) Navigate the menu using the
2.) Use the buttons to select a DMX channel from 001-512.
3.) Press the button to confirm.
Select the DMX Channel Mode:
1.) Navigate the menu using the
2.) Use the buttons to select either 5CH, 6CH, 7CH, or 10CH mode.
3.) Press the button to confirm.
Slave Mode: Set slave fixtures to: Addr: 001, 6CH mode to ensure correct
reception of master signals. The master will be the 1st fixture in the DMX chain.
Auto Mode / Static Colors
1.) Navigate the menu using the
2.) Use the buttons to select any preset color from 00-30, or select 31
to automatically run through all of the colors.
3.) If you choose auto run, you can then adjust the color change speed, or adjust the
color fade speed.
Speed:
a.) Press the
b.) Then use the buttons to select a speed setting from 00-15 (fast <-->
slow).
c.) Press the button to confirm.
Fade:
a.) Press the
b.) Then use the buttons to select a speed setting from 00-15 (fast <-->
slow).
c.) Press the button to confirm.
31 Preset Colors + Auto Run:
00 Red 11 Green+White 22 Green+Blue+White
01 Green 12 Blue+Amber 23 Green+Amber+White
02 Blue 13 Blue+White 24 Blue+Amber+White
03 Amber 14 Amber+White 25 Red+Green+Blue+Amber
04 White 15 Red+Green+Blue 26 Red+Green+Blue+White
05 Red+Green 16 Red+Green+Amber 27 Red+Green+Amber+White
06 Red+Blue 17 Red+Green+White 28 Red+Blue+Amber+White
07 Red+Amber 18 Red+Blue+Amber 29 Green+Blue+Amber+White
08 Red+White 19 Red+Blue+White 30 Red+Green+Blue+Amber+White
09 Green+Blue 20 Red+Amber+White 31 Auto Run
10 Green+Amber 21 Green+Blue+Amber