Blizzard Lighting Quadra ROCKLITE (Rev A) - Manual (Page 7)

Page 13
ROCKLITE Quadra Manual Rev. A Copyright (c) 2011 Blizzard Lighting, LLC
DMX Values In-Depth (8-Channel Mode)
Channel Value What It Does
1 000 <--> 255 Dimmer (0% <--> 100%)
2 000 <--> 255 Red Intensity (0% <--> 100%)
3 000 <--> 255 Green Intensity (0% <--> 100%)
4 000 <--> 255 Blue Intensity (0% <--> 100%)
5 000 <--> 255 White Intensity (0% <--> 100%)
6
000 <--> 014
000 <--> 255
Strobe
Strobe Off
Strobe (Slow <--> Fast)
7
000 <--> 031
032 <--> 063
064 <--> 095
096 <--> 127
128 <--> 159
160 <--> 191
192 <--> 249
250 <--> 255
Fade, Color Change, Sound Active
No Function
Fade In (Ch. 9 Controls Speed)
Fade Out (Ch. 9 Controls Speed)
Fade In / Fade Out (Ch. 9 Controls Speed)
Multicolor Fade (Ch. 9 Controls Speed)
5 Color Jump (Ch. 9 Controls Speed)
Multicolor Jump (Ch. 9 Controls Speed)
Sound Active
8
0 <--> 255
Fade Speed
Fade Speed (Slow <--> Fast)
DMX Values In-Depth (HSV Mode)
Ch. Value What It Does
1 000 <--> 255 Hue
2 000 <--> 255 Saturation
3 000 <--> 255 Value
DMX Values In-Depth (4/5-Channel Mode)
Ch. Value What It Does (5
Ch.)
What It Does (4 Ch.)
1 000 <--> 255 Red Intensity Red Intensity
2 000 <--> 255 Green Intensity Green Intensity
3 000 <--> 255 Blue Intensity Blue Intensity
4 000 <--> 255 White Intensity White Intensity
5 000 <--> 255 Dimmer (0-100%) ---
Page 14
ROCKLITE Quadra Manual Rev. A Copyright (c) 2011 Blizzard Lighting, LLC
Troubleshooting
Symptom Solution
Fixture Auto-
Shut Off
Check the fan in the fi xture. If it is stopped or moving
slower than normal, the unit may have shut itself off due to
high heat. This is to protect the fi xture from overheating.
Clear the fan of obstructions, or return the unit for service.
Beam is Dim Check optical system and clean excess dust/grime. Also
ensure that the 220V/110V switch is in the correct position,
if applicable.
No Light Output Check to ensure fi xture is operating under correct mode, IE
sound active/auto/DMX/Etc., if applicable. Contact service
for more information.
Chase Speed
Too Fast/Slow
Check to ensure proper setup of speed adjustment.
No Power Check fuse, AC cord and circuit for malfunction.
Blown Fuse Check AC cord and circuit for damage, verify that moving
parts are not restricted and that unit’s ventilation is not
obstructed
Slow Movement Verify that 220V/110V switch is in the correct position, if
applicable. Also check that speed channels are set appropri-
ately.
No Response to
Audio
Verify that the fi xture is in “Sound Active” mode.
Adjust Audio Sensitivity, If Applicable.
Fixture Not
Responding /
Responding Er-
raticly
Make sure all connectors are seated properly and securely.
Use Only DMX Cables.
Install a Terminator.
Check all cables for defects.
Reset fi xture(s).
Intermittant
Lamp
Check lamp for properly installation.
Relamp, lamp may have reached end of life.
Remote Doesn’t
Work
Verify remote control cable is installed properly and securely.
Verify remote is correct type (CA-9 or other as applicable.)
Fixture Moving
On Its Own
Verify proper mode of operation. Is the fi xture in “Auto”
mode?
If your problem isn’t listed, or if problems persist,
please contact support: [email protected].