Blizzard Lighting Vari White ProPar (Rev A) - Manual (Page 10)

Page 10
ProPar Vari White User Manual Rev. A Copyright (c) 2013 Blizzard Lighting, LLC
NOTE: Fixtures in slave mode will display “
STBY
“ (Standby). This is NORMAL.
Return the fixture to master mode to use it as a standalone fixture.
To set a custom color in Master/Slave/Standalone Mode:
Using this function, you can select any shade of white by adjusting the White and Warm
White values from 0-255 and also apply a strobe effect.
Please note that modifying the values in this step will affect ALL modes, therefore
we recommend resetting all levels to their highest value (255) after using this
mode.
To enter color mode, select
STAT
from the menu panel and then hit the but-
ton. You can then adjust the following:
Cool White Level
A.000
then
000 - 255,
.
Warm White Level
b.000
then
000 - 255,
.
Strobe Speed
ST.00
then
000 - 020,
.
Temperature Functions:
Allows you to set a temperature protection cutoff (default is 85 degrees Celsius), and dis-
plays the current fixture temperature.
To enter the temperature functions, select
TEMP
from the menu panel and then hit the
button. You can then adjust the following:
Current temperature:
CURR
Set max temperature:
TOP
.
LED Control Panel Screen Saver:
1.) The LED control panel menu will automatically shut off after 30 seconds of
inactivity. Press and release any button to turn the display back on.