beautypg.com

Getting started, Page 3, What’s in the box – Blizzard Lighting Nova (Rev. A) User Manual

Page 3: Getting it out of the box, Powering up, Getting a hold of us

background image

Page 3

Nova™ Moving Head User Manual Rev. A

© Copyright 2014 Blizzard Lighting, LLC

1. GETTING STARTED

What’s In The Box?

• 1 x Nova™ Multibeam Moving Head Fixture

• An Ever-So-Handy Power Cord

• A Sweet Mounting Bracket

• This Lovely User Manual

Getting It Out Of The Box

Congratulations on purchasing the Nova™ multi-beam moving head fixture, surely the

most trippy new LED fixture in your lighting arsenal! Now that you’re the proud owner of a

Nova™ (or hopefully, NOVAS!), you should carefully unpack the box and check the contents

to ensure that all parts are present and in good condition. If anything looks as if it has

been damaged in transit, notify the shipper immediately and keep the packing material for

inspection. Again, please save the carton and all packing materials. If a fixture must be

returned to the factory, it is important that the fixture be returned in the original factory

box and packing.

Powering Up!

All fixtures must be powered directly off a switched circuit and cannot be run off a

rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer

channel is used solely for a 0% to 100% switch.

AC Voltage Switch - Not all fixtures have a voltage select switch, so please verify that the

fixture you receive is suitable for your local power supply. See the label on the fixture or

refer to the fixture’s specifications chart for more information. A fixture’s listed current

rating is its average current draw under normal conditions. Check the fixture or device

carefully to make sure that if a voltage selection switch exists that it is set to the correct

line voltage you will use.

Warning! Verify that the voltage select switch on your unit matches the line

voltage applied. Damage to your fixture may result if the line voltage applied does

not match the voltage indicated on the voltage selector switch. All fixtures must

be connected to circuits with a suitable Ground (Earthing).

Getting A Hold Of Us

If something is wrong, please just visit our website at www.blizzardlighting.com

and open a support ticket. We’ll be happy to help, honest.

Blizzard Lighting

N16 W23390 Stoneridge Dr. Ste E

Waukesha, WI 53188 USA

www.blizzardlighting.com

414-395-8365

Disclaimer: The information and specifications contained in this document are subject

to change without notice. Blizzard Lighting™ assumes no responsibility or liability for any

errors or omissions that may appear in this user manual. Blizzard Lighting™ reserves the

right to update the existing document or to create a new document to correct any errors

or omissions at any time. You can download the latest version of this document from www.

blizzardlighting.com.

Author:

Date:

Last Edited:

Date:

J. Thomas

10/2/2014

J. Thomas

10/2/2014