beautypg.com

Getting started, Page 3, What’s in the box – Blizzard Lighting ICE TRI LED Moving Head Wash User Manual

Page 3: Getting it out of the box, Powering up, Getting a hold of us

background image

Page 3

ICE Wash TRI Manual Rev. A

Copyright (c) 2012 Blizzard Lighting, LLC

1. GETTING STARTED

What’s In The Box?

• 1 x ICE TRI™ Wash

• An Ever-So-Handy Power Cord

• The best kind of DMX cord: A free one.

• A Sweet Safety Cable & set of Mounting Brackets

• This Lovely User Manual

Getting It Out Of The Box

You’re as cooollld as ice... but not willing to sacrifice your love... for a

great LED moving head fixture! Now that you’ve got your ICE TRI, you

should carefully unpack the box and check the contents to ensure that

all parts are present and in good condition. If anything looks as if it

has been damaged in transit, notify the shipper immediately and keep

the packing material for inspection. Again, please save the carton and

all packing materials. If a fixture must be returned to the factory, it is

important that the fixture be returned in the original factory box and

packing.

Powering Up!

All fixtures must be powered directly off a switched circuit and cannot

be run off a rheostat (variable resistor) or dimmer circuit, even

if the rheostat or dimmer channel is used solely for a 0% to

100% switch.

AC Voltage Switch - Not all fixtures have a voltage select switch, so

please verify that the fixture you receive is suitable for your local pow-

er supply. See the label on the fixture or refer to the fixture’s specifi-

cations chart for more information. A fixture’s listed current rating is

its average current draw under normal conditions. Check the fixture or

device carefully to make sure that if a voltage selection switch exists

that it is set to the correct line voltage you will use.

Warning! Verify that the voltage select switch on your unit

matches the line voltage applied. Damage to your fixture may

result if the line voltage applied does not match the voltage

indicated on the voltage selector switch. All fixtures must be

connected to circuits with a suitable Ground (Earthing).

Getting A Hold Of Us

If something is wrong, just give us a call or send an email.

We’ll be happy to help, honest.

Blizzard Lighting

W220 N1531 Jericho Ct. Suite E, Waukesha, WI 53186 USA

[email protected] | Phone: 866-493-6025

www.blizzardlighting.com