Blackline GPS Dart - Manual (Page 17)

15
Loop portion of Velcro® and
locations for placement
Installing Dart
Installing Dart with Velcro®
You may attach Dart to a surface using velcro fasteners:
1. Clean the mounting surface and the bottom of Dart.
2. Peel the backing from the loop portion of the Velcro®
and adhere to the bottom of Dart, being careful not
to cover the product label.
3. Peel the backing from the hook portion of the Velcro®.
4. Turn Dart on.
5. Attach Dart to the surface, firmly pressing into place.
™ Prior to removing Dart, wait 24 hrs for the adhesive to cure.