Blackline GPS Loner FDU - Manual (Page 18)

16 // USER GUIDE
5. Loner Mobile will acknowledge the message and instantly send the Emergency
Message to monitoring personnel.
6. Loner Mobile will NOT annunciate the Emergency Alarm pattern (it will remain silent).
7. The Silent Alarm can be canceled in Loner Mobile at any time.
™ The Loner FDU will return to normal operation. If the user cancels a Silent Emergency
Alert in Loner Mobile, this does not clear the alert within the Loner Portal user account.
Monitoring personnel are required to address the safety incident.
About Activity/Motion Monitoring
The Loner FDU is constantly monitoring your motion. If the Loner FDU has not detected
motion for two minutes, it will enter the alarm mode and annunciate the low alarm pat-
tern to indicate a pending No-motion alert. If you do not require assistance, you have
30 seconds to cancel the alert.
Canceling a pending No-motion Alert:
1. Press the Acknowledge Button for 1 second.
2. After one second, the alarm pattern will be silenced and the Loner FDU will return
to regular operation.
If you have not cancelled the alert within 30 seconds, the No-motion Alert is sent, initiat-
ing the alert escalation process. The Loner FDU will annunciate the high alarm pattern
until the alert is canceled or the battery is depleted.
Canceling a No-motion Alert:
1. Press and hold the Acknowledge Button for 3 seconds.
2. After three seconds, the alarm pattern will be silenced and the Loner FDU will
return to regular operation.
™ If the user cancels a No-motion Alert, this does not clear the alert within the Loner
Portal user account. Monitoring personnel are required to address the safety incident.
About Fall Detection
The Loner FDU is constantly monitoring your motion for falls. If the Loner FDU detects a fall,
it will enter the alarm mode and annunciate the low alarm pattern to indicate a pending
Fall Detected alert. If you do not require assistance, you have 30 seconds to cancel the alert.
Cancelling a pending Fall Detected Alert:
1. Press the Acknowledge Button for 1 second.
2. After one second, the alarm pattern will be silenced and the Loner FDU will return
to regular operation.