Blackline GPS Loner FDU - Manual (Page 13)

11
5. In the Loner FDU search screen, select Search to search for available Bluetooth
devices. This process may take a few minutes as all Bluetooth devices within
range will be displayed.
6. Select the Loner FDU from the list that corresponds to the Unit ID on the
Product Label.
7. The smart phone and the Loner FDU will establish communications.
8. Once paired, the Loner FDU green Indicator Light will remain on continuously.
™ If the Loner FDU fails to connect via Bluetooth to the smart phone, the device will enter
the no Bluetooth alarm pattern.
Turning the Loner FDU On (previously paired)
If the Loner FDU has been previously paired, follow the steps below for turning on
the device:
1. Press the Power Button to turn the Loner FDU on.
2. The beeper, alarm status light and vibrator will annunciate the chirp pattern.
3. The Power Button Indicator Light will blink as the Loner FDU connects to the
paired Loner Mobile smartphone.
4. While the Loner FDU retains a Bluetooth connection, the Power Button Indicator
Light will remain on.
™ If the Loner FDU fails to connect via Bluetooth to the smartphone, the device will
enter the no Bluetooth alarm pattern.
Turning the Loner FDU Off
If the Loner FDU is no longer required, follow these steps for turning off the device:
1. Press and hold the Power Button for three seconds to power the unit off.
2. The beeper sounds for three long beeps during the time the Power Button
is pressed.
3. The vibrator vibrates for three long pulses.
4. At the end of the three seconds the beeper, vibrator and Power Button Indicator
Light turn off.