Bendix Commercial Vehicle Systems VORAD DRIVER - Manual (Page 28)

Troubleshooting
Troubleshooting
Bendix ™ VORAD ® Failed Message
Whenever a fault condition is detected by the forward radar or the driver interface
unit, the Bendix
™ VORAD ® system will become disabled and the driver interface unit
will illuminate the orange fault indicator lamp along with a description of the system
status displayed in the LCD screen.
Note: When the system is in a failed state, the system will not alert and the Bendix ™
SmartCruise ® adaptive cruise control will not function (if enabled). Refer to
your OEM service center for help on troubleshooting the Bendix ™ VORAD ®
VS-400 system faults.
Resetting the System
If the system experiences a fault while driving, you must stop the vehicle and reset
the system by cycling the vehicle’s ignition in order to resume normal operation. If
the fault does not clear after resetting the system or returns after a period of driving,
the system must be serviced by a qualifi ed repair center.
23