Bendix Commercial Vehicle Systems BACKSPOTTER - Manual (Page 24)

Maintenance
Maintenance
The Bendix ™ BackSpotter ® is intended solely as an aid for an alert and conscientious
professional driver. A walk around test shall be performed every day to verify proper
function of the system and to familiarize the operator with the zone detection. More
frequent inspections should be performed when:
• The vehicle is operating in a particularly dirty or harsh environment.
• The operator has reason to suspect the system has been damaged.
Daily Maintenance Procedure
1. Clean the black sensor surface of any accumulation of dirt, mud, snow,
ice or debris.
2. Visually inspect the attached wiring and cable and verify that they are
properly secured, not chafi ng or dangling free where they could become
snagged and damaged. Inspect the sensor and driver display unit to verify
that they are securely attached to the vehicle.
Vehicle brake must remain engaged to prevent injury.
3. Test system for proper operation. (See the Installation section under
“Testing”.)
▲
WARNING !
20