Bendix Commercial Vehicle Systems SRC-7000 TRAILER SPRING BRAKE VALVE User Manual
Src-7000, Trailer spring brake valve

1
SD-03-4656
Bendix
®
SRC-7000
™
Trailer Spring Brake Valve
FIGURE 1 - BENDIX
®
SRC-7000
™
TRAILER SPRING BRAKE VALVE
EXHAUST
1/4” NPT
SUPPLY
3/8” NPT
DELIVERY (4)
1/2” NPT
SPRING BRAKE
RESERVOIR
DESCRIPTION
The Bendix
®
SRC-7000
™
trailer spring brake valve is
a reservoir-mounted trailer valve that can control up to
six spring brake actuators during parking or emergency
applications. It has the following capabilities:
• Automatically applies trailer spring brakes in the event
of a breakaway or trailer supply line failure.
• Protects trailer reservoir(s) air pressure in the event of
a breakaway or trailer supply line failure.
• Does not allow an automatic trailer spring brake
application with air pressure loss in trailer reservoir(s).
• Allows the trailer spring brakes to be applied and released
repeatedly with a failed trailer reservoir(s):
• Anti-compounding prevents an overriding service brake
signal while the trailer supply line is at atmospheric
pressure.
• Does not allow service system charging if a failure occurs
in the parking brake circuit.
• Muffl
er & snorkel capable.
PORTS
1 - 1/2" NPT Spring Brake Reservoir Mounting (RES)
1 - 1/4"-18 NPT Trailer Supply (1 SUP)
1 - 1/4"-18 NPT Trailer Service (4 CONT)
4 - 3/8"-18 NPT Delivery (2 DEL)
1 - Exhaust (3 EXH)
The SRC-7000
™
trailer spring brake valve consists
of a composite body, pressure protection valve and
reservoir-mounting nipple.
EXHAUST
1/4” NPT
CONTROL