Display symbols – Bang & Olufsen BeoCom 2500 - User Guide User Manual
Page 4

DISPLAY
KEYPAD
↓
DISPLAY SYMBOLS
P
• Programming (storing or editing a name and number in the Phone Book).
S
• Searching in the Phone Book.
• Is on when the loudspeaker is connected.
• Flashes when the microphone is muted.
• Is on during an incoming call.
• Flashes when the ringing signal is disconnected.
• Flashes when the batteries are low.
Please note! The display turns off automatically when the telephone has not been used for 30 seconds.