Bang & Olufsen BeoCom 2500 - User Guide - Manual (Page 29)

OPERATOR CODE
An operator code is used when you want
to make a call via an alternative tele-
phone operator. When calling a phone
number, BeoCom 2500 inserts this code
automatically when it is once stored in
the telephone.
The alternative operator may be chosen
under certain conditions:
• Unconditional. Choose the alternative
operator for all calls.
• Choose the alternative operator for
calls with numbers starting with the
same group of digits.
• Choose the alternative operator for
calls to all other numbers than those
starting with a dedicated group of
digits.
STORE AN OPERATOR CODE FOR ALL CALLS
Press
Menu,
Press Enter
Press
>
until OPERATOR CODE is shown in the display
Press Enter
Enter the operator code (e.g. 1 0 1 0)
Press Enter
MENU *
<
SETUP MENU >
SETUP MENU
< PRESET VOLUME>
OPERATOR CODE:
_
STORED
OPERATOR CODE
X