Bang & Olufsen Beo6 - User Guide - Manual (Page 13)

13
Manual wireless setup
If your network is set up with a hidden
SSID, you must make a manual
connection. This means that you must
enter the name of the network (SSID),
a password and network authentication.
Make manual setup
> Select Wireless in the Setup menu.
> Press Manual on Beo6.
> Enter the network name (SSID) in the
display and press OK.
> Choose the network authentication.
Options are Open, WPA and WPA2.
> A display for entering your password
appears.
> Enter your network password and press GO.
> When connection is established,
Connection OK appears in the
Beo6 display.
> Press OK to return to the Wireless menu.
> If necessary, move on to the next access
points and repeat the procedure with all
access points in your wireless network.
> Press Back to leave the menu.
If the product you want to operate gets
a different IP address, you must enter
the new IP address in Beo6 in order to
enable 2-way communication.
When you use Beo6 for 2-way
communication with BeoSound 5,
you must look up the IP address on
BeoSound 5 first.
Enter new IP address
> Find the IP address on BeoSound 5 by
entering the NETWORK INFO menu and
look up IP ADDRESS. The address could,
for example, be 192.168.100.111.
> Select Wireless in the Setup menu.
> Press Server IP on Beo6.
> Enter the IP address in the display and
press GO.
Enter new IP address
>> Wireless setup
GO
Q W E R T Y U I O P
A S D F G H J K L
Z X C V B N M
Enter SSID
SHIFT
SYM 123
Wireless
Server IP
WPS Auto Manual
On/Off List Beo6 Info