Bang & Olufsen Beo6 - User Guide - Manual (Page 12)

12
>> Wireless setup
Automatic wireless connection
Bang & Olufsen recommended access
points support automatic connection –
also called Wi-Fi Protected Setup (WPS).
There has to be a ‘connect’ button
(WPS/ ) on the access point.
See the guide enclosed with your access
point for more information.
Autoconnect to a wireless setup
> Select Wireless in the Setup menu.
> Press WPS on Beo6.
> Press the ‘connect’ button on your
access point.
> Press OK on Beo6. Beo6 connects to the
access point, this may take a while.
> When connection is established,
Connection OK appears in the
Beo6 display.
> Press OK to return to the Wireless menu.
> If necessary, move on to the next access
point and repeat the procedure with all
access points in your wireless network.
> Press Back to leave the menu.
If connection is not established Connection
failed appears in the Beo6 display. Move
closer to the access point and try to connect
again or use the manual setup.
Search for wireless networks
Beo6 can scan for all networks in range,
and you can connect to the one you
want. This can, for example, be used if
your access point does not support
automatic setup.
Make Beo6 search for networks
> Select Wireless in the Setup menu.
> Press Auto. Beo6 starts searching for
networks, this may take a while.
> A list of networks within range appears in
the Beo6 display. Press the one you wish
to connect to.
> If a network password is required, a display
for entering your password appears.
> Enter your password and press GO.
> When connection is established,
Connection OK appears in the
Beo6 display.
> Press OK to return to the Wireless menu.
> If necessary, move on to the next access
points and repeat the procedure with all
access points in your wireless network.
> Press Back to leave the menu.
The network at the top of the list is the one
supplying the strongest signal to where the
remote control is placed. This is most likely
the access point you are closest to.
Auto
Linksys 2
Cisco 1
Private Network
Zyxel
✓ ✓
Wireless
Server IP
WPS Auto Manual
On/Off List Beo6 Info
Access Point
A Access Point
B
List of available wireless networks, the signal
strength is shown for each connection.
The wireless setup menu.