Bang & Olufsen Beo4 (w/o navigation button) - User Guide - Manual (Page 16)

Cleaning the Beo4…
Wipe the Beo4 remote control with a soft,
lint-free, wet cloth which is wrung firmly.
Changing the batteries
When BATTERY appears in the Beo4 display,
it is time to change the batteries in the
remote control.
The Beo4 requires three batteries (placed
under the lid on the back). We recommend
that you use 1.5 volt (size AAA) Alkaline
batteries only.
Replace the batteries as shown on the next
page.
When you have replaced the batteries, you
must wait for about 10 seconds until the
display reads TV. The Beo4 remote control is
then ready to operate again.
Note: We recommend that you keep a finger on
top of the batteries until the lid is replaced.
Maintenance …
1
2
3
1
2
16
CAUTION! Do not
expose batteries to
excessive heat such as
sunshine, fire or the
like!