How to update your dvb-hd module – Bang & Olufsen DVB-HD - Software update instructions User Manual
Page 3

1. Press DTV* on your remote control and wait
for picture.
2. Insert USB key in the USB socket - see
illustrations to find out where the USB socket is
placed.
3. Press MENU to bring up the menu overlay.
4. Press 4 to open the SETUP menu.
5. Use the arrow buttons to move to OPTIONS
and press GO.
6. Use the arrow buttons to move to SOFTWARE
UPDATE and press GO.
7. Press the green button to check for new
software. Text appears on the screen, if new
software is available.
8. If no new update is found, try to press the
green button again.
9. Press the green button to start the software
update.
10. During the update, the text:
“DOWNLOADING, STORING SOFTWARE, DO
NOT SWITCH OFF YOUR TELEVISION”
appears on the screen.
11. Wait for text:
“UPDATE HAS FINISHED, PLEASE REMOVE USB
MEMORY STICK, SWITCH YOUR TELE VISION
TO STANDBY”
or if this message does not appear, just wait
for the progress bar to disappear. If colours
appear on the screen after the progress bar has
disappeared, do not switch the television to
standby before the screen has turned green.
12. Remove the USB key and switch the television
to standby.
13. Disconnect the television from the mains for 20
seconds, then reconnect.
14. Now press DTV* again to switch on the
television.
15. Update is complete.
*Note: If you have disabled the internal TV
tuner, and usually activate the DVB-HD module
by pressing TV, press TV instead.
How to update your DVB-HD module
Please note that when updating the DVB-HD
software, all user settings may be reset to
default. This includes channels and stations lists
which must then be reinstalled.
POWER LINK
CONTROL
CENTRE 1
CINEMA
MONITOR
SMARTCARD
PCMCIA
IR IN
DTV DATA
MASTER LINK
1(SUB)
1
2
3
2
3
4
TTL
5
6
ANT
HDMI IN
DVI-D OUT
AV 4
AV 3
RS232
IR IN
CTRL
SPDIF
VIDEO IN
L IN
R IN
IR 1+2
LINK TV
S VIDEO
Y
SPDIF
CTRL
Pb
Pr
AV 2
AV 5
AV 1
Y
SPDIF
DISPLAY 1
CTRL
SPDIF
CTRL
Pb
Pr
R IN
L IN
VIDEO
IN
SPDIF
CTRL
DISPLAY 2
A
B
C
D
AV 6
R IN
L IN
VIDEO
IN
SPDIF
CTRL
VGA
S VIDEO