Bang & Olufsen BeoVision 8-26/32 - User Guide - Manual (Page 9)

9
Picture format Speaker balance or combination
If you connect loudspeakers to your television,
you can change the speaker combination at
any time.
Press repeatedly to display
SPEAKER on Beo4
Press to select a speaker
combination
Press to remove SPEAKER from
the Beo4 display and return to
the source you were using
Speaker combinations
SPEAKER 1 … Sound in the
television speakers only.
SPEAKER 2 … Stereo sound in
the two front speakers.
SPEAKER 3… The television
speakers and the front
speakers are active.
Select a picture format to optimise the picture.
Press repeatedly to display
FORMAT on Beo4
Press if you want to optimise the
picture, or …
… press the number of the
desired picture format
If you have chosen Format 1 …
Press or to select variations
of this format
If you have chosen Format 1*
or Format 2 …
Press or to move the
picture up and down
Press to leave the FORMAT
function
*Pictures in 4:3 format cannot be
moved up and down.
Picture formats to choose from …
FORMAT 1 … For standard TV pictures. Three
variations are available: 4:3, 15:9 and Panoramic
view (for the largest picture).
FORMAT 2 … For letter-box pictures. If necessary
move the picture up or down to ensure that
channel names or subtitles – if these appear in
the broadcasted picture – can be seen. In some
cases FORMAT 2 is selected automatically.
FORMAT 3 … For genuine 16:9 wide-screen
pictures. FORMAT 3 is usually selected
automatically. If this is not the case, you can
select it yourself.
To temporarily remove the picture from the screen,
press LIST repeatedly to display P.MUTE on Beo4,
then press GO. To restore the picture again, press
any source button, such as TV.
LIST
FORMAT
GO
1 – 3
EXIT
LIST
SPEAKER
1 – 3
EXIT
NOTE! For further information about how to
connect speakers to the television, refer to the
chapter ‘Socket panel’ on page 21 in the
Reference book.