Bang & Olufsen BeoCenter 6-23 - User Guide - Manual (Page 16)

16
The pincode system
The pincode system is intended to
make normal use of your television
impossible for someone who does
not know the pincode. You choose
whether or not to activate the
pincode system.
When the pincode system is activated
and the television has been
disconnected from the mains for 15–30
minutes, the pincode system goes
into effect.
When reconnected and switched on,
the television automatically switches
itself off after four minutes. Entering
the pincode returns the television to
normal.
Activate the pincode system
Bring up the TV SETUP menu on the screen,
activate the PINCODE menu and choose from
the submenus. If you wish to deactivate the
pincode system, you can do so by deleting
your pincode.
To activate the pincode system …
> Press MENU to bring up the TV SETUP menu.
> Press twice, followed by STOP. The PINCODE
menu appears on the screen.
> Use the number buttons or on Beo4 to
enter the four digits of your code. Press to go
back to digits you wish to correct and use or
to change them.
> Press GO after the last digit is found.
> Re-enter your code to confirm it and press GO
again. If the two codes are not identical, the
input fields are cleared and you must enter the
code again.
To change or delete your pincode …
> Press MENU to bring up the TV SETUP menu.
> Press twice, followed by STOP. The PINCODE
menu appears on the screen.
> Enter the correct pincode and press GO.
DELETE PINCODE is highlighted.
> To delete your code, press GO.
> To change your code, press to highlight
NEW PINCODE and press GO. Enter the new
code using the number buttons or and
press
GO. Re-enter the new code to confirm it.
If you inadvertently press a wrong button while
entering a code, press STOP. The entry is
cancelled and the input fields are cleared.
PINCODE
next
accept GO
PINCODE 0 . . .
CONFIRM PINCODE . . . .
PINCODE
select GO
DELETE PINCODE
NEW PINCODE
NOTE! If you change your pincode more than five
times within a three-hour period, the PINCODE
menu becomes inaccessible for three hours,
assuming the system remains on during this time.
Switching off the system lengthens the delay.
3507791_0604UK UG BeoCenter 6-23.indd 16 05/04/06 14:15:46