Bang & Olufsen BeoVision Avant - User Guide - Manual (Page 33)

33
Pause and play back a programme
With a connected USB HDD or
SSD set up for recording you can
pause, resume and repeat a
digital programme in progress.
The television continues saving
during timeshift, so you are sure
to see the entire programme. For
information about USB HDDs or
SSDs, see page 25 .
To find out how to copy content from the
timeshift buffer to a permanent recording,
see page 37 .
You cannot activate MHEG or HbbTV
during timeshift mode.
Using a USB HDD or SSD for timeshifting
may not be supported by all programme
providers.
Pause and resume a programme …
Pause the programme on the current
channel and resume the programme after a
while.
Press to pause a programme
Press to resume the
programme
To return to the live signal, select the source
again, for example, TV.
Go to a specific point in time …
Enter a specific time to go to in the timeshift
buffer content.
Select a point in time
Step or cue backwards or
forwards …
Step backwards or forwards minute by
minute.
Press to step backwards or
forwards
Press and hold to cue
backwards or forwards
0–9
or
HBO 9 | TV
Independence Day RATING 6 09:30 – 11:50
PROGRAMME 3 / 3 PAUSE 07:10 – 10:15
After ‘Now showing’ (dotted =
buffered. White = unbuffered)
Current
programme
in buffer
Total number of programmes
Before ‘Now showing’ (red =
buffered. Grey =
unbuffered)
‘Now showing’
indicator
Start/stop
time of
current
programme
Buffer start time
Playback point (‘Now
showing’)