Autocue CRT Upgrade Kit - Manual (Page 2)

Components
A Extrusion
B
Monitor
Mounting
Rods
C Screws
Assembly
1. Remove your old CRT Display from the back plate,
including its mounting bracket (above).
2. Mount the extrusion to the back plate using the
four screws provided.
3. To mount the monitor rods, screw them into the two
sliding nut inserts. It is possible to move the monitor
rods to mount any of the displays in our product
range.
4. Install monitor rods and adjust the distance
between the rods to correspond with the
display you have purchased.
5. With the monitor rods installed, it is now
possible to mount the monitor.
A
B
C