Autocue Medium Video Tripod - Manual (Page 2)

Assembly
2. Level the tripod head by
loosening the knob under
the head.
3. Level the head using to
the bubble level.
4. Lock the head by using
pan (A) and tilt (B) locks.
A
B
5. To remove the hot shoe
loosen the hot shoe locking
lever (A) so that the hot shoe
moves freely.
A
6. Turn the safety lock
anti-clockwise to allow the
hot shoe to slide free.
7. Attach the hot shoe to a
camera or prompter and
place back on the tripod
head.
1. Before opening the tripod,
release all three locking
knobs and lift up the tripod
to the desired height. Relock
the legs and open the tripod.
A Leg locking knobs
B Head
C Spreader
D Bag
E Hot shoe
F Pan bar
G Pan bar clamp
H Tilt drag control
I Hot shoe locking
lever
A
A
B
C
D
Components
E
F
G
H
I
8. There is a choice of
1/4” or 3/8” BSW camera
fixings.
A
9. Adjust the tilt drag by
rotating the tilt drag control
(A)
10. To adjust the
length of the pan bar
rotate the locking
collar (A) and slide
the pan bar to the
desired length.
A
autocue.com