Installation, Specifications – AJA RD10MD User Manual
Page 8

8
Installation
Typically, RD10MD installation consists of the following:
1.
disconnect power from the frame (remove line cord)
2.
remove the FR1/FR2 front panel
3.
install RD10MD card module
4.
apply power to the frame by connecting a north american-style power cord from the
frame to mains power (90 to 260 VAC)
Instructions for removing the frame front door for module installation is discussed in the
FR1/FR2 User Manual.
Specifications
Item
Specification
Formats:
HD: 1080i 50/59.94/60 Hz
1080p/psf 23.98/24/25/29.97/30 Hz
720p 23.98/24/25/29.97/30/50/60 Hz
Inputs:
2 Channels, HD-SDI or SDI SMPTE 259/292/296, 10-bit, 2x BNC
Outputs:
Each Channel has two outputs configurable for either SDI (SMPTE
259M, 10-bit) or analog composite NTSC/PAL, 2x BNC
Channel 1 has two reclocked loop-through outputs, 2x BNC
Channel 2 has one reclocked loop-through output, 1 BNC
Downconversion:
Multi-point interpolation, 10-bit processing
3:2 conversion for 23.98/24p/psf inputs
Size:
Fits AJA R-Series Frames
Power Consumption:
7 watts