User controls – AJA RD10MD User Manual
Page 5

1
5
AJA RD10MD Dual HD to SD Downconverter User Manual
User Controls
The user interface for configuring the RD10MD and
selecting output formats is a pair of dipswitches at the
front of the card and several jumpers in the middle and at
the back of the card (see J2, J3, J5, and J6 in the photo
below).
Two multi-color LEDs at the front of the card
additionally show the type of input present at each
channel (HD=Orange or SD=Green).
The loop outputs always reflect the reclocked input.
Channel 1 has two reclocked looped outputs, while
Channel 2 has only one.
The format of the downconverter outputs, either SDI or
analog composite, are configured by the jumpers J5 and
J6. Jumpers J2 and J3 configure the HD to SD delay and
the type of embedded timecode (RP188 or RP215).
Tables later in the manual define the jumper settings and
their corresponding meanings.
RD10MD Card Module, User Controls
LEDs
DIP
Channel
1
DIP
Channel
2
DIP
Switches
J2 J3
J5
J6