Troubleshooting guide, Locating the circuit breaker on your treadmill – Bowflex Treadmills 5 Series User Manual
Page 33
Troubleshooting Guide
PROBLEM
CAUSE
CORRECTION
Treadmill will not start
Not plugged in
Plug into three prong grounded outlet.
Safety pull pin not inserted.
Insert safety pull pin.
Treadmill circuit breaker tripped.
Reset circuit breaker.
Elevation not accurate
Out of calibration.
Recalibrate unit.
Speed not accurate
Out of calibration.
Recalibrate unit.
Set in wrong units.
Change units.
Walking belt slips
Walking belt loose.
Adjust walking belt tension. (See page 26)
Walking belt not centered
Walking belt tension not centered
across the rear roller.
Adjust walking belt tension. (See page 26)
Heart rate not displayed
(using chest strap)
Transmitter not making good contact
with skin.
Moisten skin contact area on the chest strap, or
turn chest strap upside down.
Electromagnetic interference.
Turn off any television, microwave or computer
within 6 feet (2 meters) of treadmill.
Treadmill squeaks
Pivot points need lubrication.
Lubricate pivot points.
Locating The Circuit Breaker On Your Treadmill:
The breaker is near the front of the treadmill and near the power cord.
33
Warranty