Bosch 4100DG-09 - Manual (Page 10)

62 Boschtools.com Toll Free: 877-BOSCH-99
Specifications
Rating 120V
Amperage 15.0
No Load RPM 4,300
Max. Tool HP 3.3
Blade Diameter (in.) 12"
Arbor Size 1"
Height (in.) 17"
Weight (lbs.) 43
Bevel Angle Range -3° to 45°
Bevel Detents 33.9°, 45°, 0°
Miter Angle Range 52° Left/52° Right
Miter Detents
0°, 15°, 22.5°, 31.6°, 45° L/R
Crown Molding - Angled Against Fence
6-5/8" (38° Spring / 90° Corner)
Crown Molding - Laying Flat
6-5/8" (38° Spring / 90° Corner)
Base Molding - Against Fence 5-3/8"
Miter/Bevel(Max Height x Width)
0
° /0 ° - 3-3/4" x 6-3/8" (4 x 6 Nominal)
0 ° /45 ° - 2-3/4" x 6-3/8" (3 x 6 Nominal)
45 ° /0 ° - 3-7/8" x 4-1/4" (4 x 4 Nominal)
45 ° /45 ° - 2-3/4" x 4-1/4" (3 x 4 Nominal)
Miter/Bevel(Max Width x Height)
0
° /0 ° - 7-7/8" x 2-7/8" (3 x 8 Nominal)
0 ° /45 ° - 7-7/8" x 2" (2 x 8 Nominal)
45 ° /0 ° - 5-1/2" x 2-7/8" (3 x 6" Nominal)
45 ° /45 ° - 5-1/2" x 2" (2 x 6 Nominal)
Includes
Quick-Action Clamp ......................... BB1200
40 Tooth Carbide Blade ........ 2 610 910 836
Blade and Stop Wrench ..................Included
Fence and Base Wrench .................Included
Dust Bag ............................................ BB1205
Directional Dust Chute ......... 2 610 910 845
Optional Equipment
Gravity-Rise™ Wheeled Stand ............... T4B
TracRac® Portable Stand w/Wheels .... T3B
Table Insert ....................................... BB1201
Pipe Extension Kit with Workpiece
Support Stop ................................ BB1202
Crown Molding Support.................. BB1203
Extension and Stock Stop ............... BB1204
Vacuum Adaptor (35mm hose) ...... VAC003
Features
• Powerful 15 Amp motor, 3.3 max. tool HP
• Crown miter detents - 31.6° Miter and 33.9° Bevel
detents for quick, accurate, crown cuts
• Large 25" aluminum base with 3-1/4" sliding
extension for 28-1/4" total length - Provides
extra support
• Speed-Track Sliding Fence System - Base and
fence slide independently
• Tall 5-1/8" sliding fence - For easy bevel setups
and increased crown molding cutting capacities
• Exclusive Wedge-and-Slot Miter Detent System -
Consistent and precise miter angles over the
life of the tool
• Miter detent override - For easy setting of any
neighboring angle
• Cast and machined scales - Visible for the life
of the saw
• Electric brake - For quick, repetitive cuts. Stops
blade in seconds.
• Spindle lock - For fast easy blade changes
3912
12" Compound Miter Saw
Specifications
Rating 120V
Amperage 13
No Load RPM 4,700
Max. Tool HP 2.8
Blade Diameter (in.) 10"
Arbor Size 5/8"
Height 20.63"
Weight of Saw (lbs.) 54
Length (in.) 35.93"
Bevel Angle Range 45° left to 0°
Bevel Detents
33.9° left with positive stops at 0° and 45°
Miter Angle Range 52° to left, 60° to right
Miter Detents
0°, 15°, 22.5°, 31.6°,
45° left and right, and 60° right
Crown Molding Angled 4-1/4" - 38°
Crown Molding Laying Flat 10-1/4"
Base Molding Flat 12"
Base Molding Angled 3-1/2"
Miter/Bevel(Max Height x Width)
0°/0° - 3-1/2" x 12" (4 x 12 Nominal)
45°/0° right - 3-19/32" x 8" (4 x 8 Nominal)
0°/45° left - 2-1/4" x 12" (3 x 12 Nominal)
45°/45° - 2-1/4" x 8" (3 x 8 Nominal)
Includes
10" 60- Tooth
Carbide-Tipped Blade ...............CB1060L
Tool Free Workpiece Clamp . 2 610 950 455
Blade Change Wrench ....................Included
Dust Bag ............................................MS1232
Optional Equipment
Gravity-Rise™ Wheeled Stand ............... T4B
TracRac® Portable Stand w/Wheels .... T3B
Vacuum Adaptor (35mm hose) ...... VAC004
Features
• Up-Front Controls - Exclusive feature provides
easy and efficient access to miter and bevel
angle settings
• Quick Release Fence – For fast and easy adjustment
• Dual Workpiece Supports – Extends material
support from 21" (53.3 cm) to 36" (91.4 cm)
• Exclusive Wedge-and-Slot Miter Detent
System – Consistent and precise miter
angles over the life of the tool
• High Visibility Bevel and Miter Scales – For easy
setting of accurate bevel and miter angles
• Crown Miter Detents - 31.6° miter and 33.9° bevel
detents for quick and accurate crown cuts
• Miter Detent Override – Enables miter cuts at any
angle in saw’s range
• Soft-grip Horizontal Handle with Ambidextrous
Lockout- For comfortable repetitive cuts
• Spindle Lock – For fast, easy blade changes
4405
10" Single Bevel Slide Compound Miter
Saw with Up-Front Controls
Miter
Saws