Barbie L7820 - Manual (Page 13)

L7820pr-0920
• With the seat at an angle, insert the tabs on the front edge of
the seat into the slots in the foot-well wall A .
• Push down firmly on the edge of the seat above each tab to
snap the tabs into the slots B .
• Rotate the back of the seat down C
to snap the seat back tabs
into the slots in the vehicle. Push down firmly on the seat back.
20
13
ASSEMBLY
F
L7820pr-0920
Seat
Seat Back
Tabs
Slot
Tabs
A
B
C
PUSH
HERE
21
• Insert a #10 x 3 /
4
" screw into the rear edge of the seat. Tighten
the screw.
19
• Insert each fastener end of the long seat belt strap through a
slot in the center of the seat. Make sure the fasteners face the
outer edge of the seat.
• Pull each side of the long seat belt strap evenly through the
slots. Make sure to pull each T-loop through a slot.
• Turn the seat upright.
T-Loop
Fastener End
Long Seat Belt Strap
SIDE VIEW
BACK VIEW
18
• Turn the seat upside down.
• Insert the fastener end of a short seat belt strap through the
slot near the outer edge of the seat. Make sure the side of the
seat belt with the fastener faces the outer edge of the seat.
• Pull the short seat belt strap completely through the slot until
the last T-loop at the opposite end of the belt catches against
the slot. You will pull one T-loop through the slot.
• Repeat this procedure to assemble the other short seat belt strap.
Short Seat
Belt Strap
Fastener End
Seat
Slot
T-Loops
Slot
T-Loop (Pull through slot)