Bosch Nexxt 800 WFMC8401UC - Manual (Page 23)

23
- Power Wash" X
The Power Wash option is
recommended for use ONLY for
heavily soiled clothes that
require the removal of tough,
ground-in protein-based
stains. It is NOT recommended to
use the Power Wash option with
other cycles when laundering
normal or lightly soiled clothes.
q Turn the program selector to the
desired program.
q Load the laundry and close the
door.
The Start/Pause indicator light
flashes (red).
Example:
q Press the Menu button until,
Mode: Normal Wash" is
displayed.
The 
" symbol flashes.
The Start/Pause indicator light
flashes (red).
i If no buttons are pushed within 10
seconds the display will revert
back to normal Ready". Changed
settings will be retained.
q Press the Select button until the
desired washing mode is
displayed.
i If Power Wash: on" or Quick
Wash: on" were selected, the

X "or  " symbol are
permanently displayed when the
menu is left.
You can select other settings by
pressing the Menu button and change
them by pressing the Select button.
q Press the Start/Pause button.
The program starts.
The indicator light is lit.
i The individual program steps are
indicated in the display field.
PreĆSoak
An integrated pre Ćsoak cycle for
preĆtreatment of heavily stained items.
q
Turn the program selector to the
desired program.
q Load the laundry and close the
door. The Start/Pause indicator
light flashes (red).
Example:
q Press the Menu button until
Pre ĆSoak: off" is displayed.
The o" symbol flashes.
The
Start/Pause indicator light
flashes (red).
i If no buttons are pushed within 10
seconds the display will revert
back to normal Ready". Changed
settings will be retained.
q Press the Select button until
Pre ĆSoak: off" or PreĆSoak: on"
is displayed.
i If Pre-Soak: on" was selected,
the o" symbol is permanently
displayed when the menu is left.
You can select other settings by
pressing the Menu button and change
them by pressing the Select button.
q
Press the Start/Pause button.
The program starts.
The indicator light is lit red.
i The individual program steps are
indicated in the display field.
Signal
The acoustic signal indicates the start
or end of the program, operating errors
or malfunctions.
You can specify the volume of the
acoustic signal.
Activating, specifying the
signal volume and
deactivating the signal
q Turn the program selector to the
desired program.
q Load the laundry and close the
door.
The
Start/Pause indicator light
flashes (red).
Example:
q
Press the Menu button until
Signal: off" is displayed.
The Z" symbol flashes.
The
Start/Pause indicator light
flashes (red).