Behringer Premium DJ Mixers with infiniumContact-FreeVCA Crossfader NOX1010 - Manual (Page 2)

Page 2 of 20
Awesome 3-band EQ with switchable
full-kill filters plus 8-segment level
meters with peak hold function
per channel
Premium phono and XENYX mic
preamps for superior detail and
ultimate punch
3 Line inputs with USB connectivity,
3 Phono/Line and 1 Mic input
VCA-controlled faders with fader
start for utmost reliability and
noise-free performance
Sophisticated headphone monitoring
section with tone control of
headphone output
Extensive XLR Master, Record and
Booth outputs
NOX404: Premium 6-Channel DJ Mixer
with infinium “Contact-Free” VCA
Crossfader, Beat-Syncable FX, VCFs and
USB Audio Interface
Premium 6-channel club DJ mixer for
the most demanding turntablist,
remixer and digital DJ
Beat-syncable FX section with
2 parameter controls assignable to
Mic, 1, 2, CFA, CFB or Master
2 mind-blowing VCFs (Voltage
Controlled Filters) can be assigned to
any channel or crossfader side
2 independent LFOs (Low Frequency
Oscillators) for awesome
filter modulation
6 Line and USB inputs, 4 Phono/Line
plus 2 Mic/Line inputs—all channels
with Gain control, switchable EQ and
level meter
Beat-syncable FX
A useful and powerful addition
to NOX Series mixers is the internal
effects engine. This processor offers 12
high-quality digital effects that can be
assigned to the microphone, channel 1
or 2, crossfader A or B, or the main mix.
Each effect has several parameters that
can be adjusted to suit your purpose. In
general, the TAP button is used to beat-
sync the effect to the tempo of the music
by pressing it in rhythm. The INTENSITY
fader usually controls the wet/dry mix
of the effect (how much is blended with
the unaffected signal). The FREQUENCY
knob can have various assignments. In
beat-sync mode (engaged by tapping
the rhythm with the TAP button), it will
determine the tempo multiple. It can also
adjust the rate on its own, if beat-sync is
not engaged or not available.
Here’s a brief description of the FX
available in every NOX Series mixer:
• 2XCOPY: Makes a copy of the signal,
which is delayed by a defined time.
• TAPE ECHO: A simulation of the
echo effect that occurs between
two tape reels, which has a warm,
slightly decayed sound.
• ECHO: A more modern delay effect,
which is very useful for juggling beats
and emphasizing musical phrases.
• FLANGER: A flanger is a wave-like
effect that modulates the signal.
• PHASER: A sweeping phase shifter
effect. It is similar to a flanger,
except that it is enharmonic,
producing a more “swooshing” sound.
• LP and HP FILTER: A Low Pass
filter cuts out any frequency above
its parameter settings. A High Pass
filter cuts out frequencies below its
parameter settings.
• AUTO PAN: Automatically moves the
signal from one side of the stereo
image to the other.
• VOCODER: Creates a robot voice
sound straight from the early days of
electronic music.
• REVERB: This is a classic effect that
adds space and air to the sound.
• REV REVERB: Reverse reverb.
• LMT+DIST: Band-limited distortion
creates a tight, compressed and
distorted sound to any signal.
Total Control
The NOX202, NOX303, NOX404 and
NOX1010 models provide superb tone
control, thanks to a 3-band EQ and full-kill
filters, Gain control and precise level meter
per channel. Meanwhile, the NOX606
features 4-band channel EQ and level
meter for MAIN output, plus a post-fader
mono output to drive subwoofers. All NOX
Series mixers feature extensive headphone
monitoring and cueing options.
NOX202
If the NOX202 had a middle name it
would be “easy.” The NOX202’s intuitive
layout makes it easy to operate right out
of the box. Beneath its elegant exterior
lies the heart of a 2-channel DJ battle
mixer complete with a beat-syncable
FX section, 3-band channel EQ and full-kill
filters. Premium-grade phono preamps,
along with our legendary XENYX mic
preamps, ensure the ultimate in signal
integrity and punch. And thanks to
NOX202’s onboard USB audio interface
you can add your MP3s to the mix with
just the flick of a switch. The NOX202 is a
veritable killer in its weight class!
NOX303
Armed with many of the same
features as the NOX202, the NOX303
features an additional input channel
and VCA-controlled faders with fader
start, which allows you to seamlessly
integrate auto-start capable CD players.
You get our outstanding phono and
XENYX mic preamps, renowned for
their superior sonic integrity and wide
dynamic range, along with built-in USB
connectivity. State-of-the-art, beat-
syncable FX processing and balanced
XLR Master Outputs round out this
mighty middleweight.
Continued on next page
NOX1010/NOX606
NOX404/NOX303
NOX202