Belkin High Performance Wireless VPN Router N300 User Manual

Page 86

advanced

Routing

If your WIRELESS ROUTER device is connected to a

network with different subnets, then this feature will allow

the different subnets to communicate with each other.

Static Routing

enable Static Routing

Check this box to Enable the Static Router feature.

destination Lan IP

Enter the IP address of the destination LAN.

Subnet Mask

Enter the Subnet Mask of the destination LAN IP address

default Gateway

Enter the IP address of the Default Gateway for this destination IP and Subnet.

Hops

Specify the maximum number of Hops in the static routing rule.

Interface

Select whether the routing applies to LAN or WAN interfaces.