Bushnell ImageView 118331 - Manual (Page 10)

10
photo storage Capacity Reference
( avg. capacity for settings, +/- 5 photos)
1 Determines amount of file
compression:
Hq: High Quality (minimum
compression)
Sq: Standard Quality (medium
compression)
2 Internal RAM available for
photo files: approx. 6 MB
“Image Size” refers to the pixel
dimensions, or resolution, of the
digital file.
Actual storage capacity will vary
based on content of each photo
file. You may be able to take a few
photos more or less than the listed
average capacity.
Use higher resolution and quality
settings for photos you may want
to enlarge or crop later. If required,
they can always be reduced to a
smaller file size using your photo
software. Use lower resolution
and/or standard quality settings
if you will only email, insert into
documents, or make small prints,
and do not want to resize the file
later.
Image Size # of Star
Icons
Megapixels
(approx)
Quality 1
Setting
Internal
Memory 2
256 MB
SD Card
2034x1728 4 4.0 (Interpolated) High 7 photos 299 photos
4 Standard 11 469
2048x1536 3* 3.1* High* 10 427
3 Standard 14 597
1600x1200 2 1.9 High 15 640
2 Standard 22 939
640x480 1 0.3 (“VGA”) High 116 4,949
1 Standard 168 7,168
Notes
aDDiTiONaL spECifiCaTiONs
Video Clip Resolution: 320x240 pixels per frame @10 fps rate, avi file format
Maximum Video Recording Time: determined by available internal or card memory.
Approx. 5 minutes using full capacity of available internal RAM memory.
Maximum sD Card Capacity: 1 GB (gigabyte), standard speed recommended
imaging sensor: 3.14 MP CMOS
internal RaM: 8MB, approx 6MB maximum available for photo/video file storage.
Capacitor maintains memory contents for 1-2 minutes while changing batteries. Use
of SD card recommended to avoid potential loss of files if batteries become depleted.
* Default settings: 3.1 megapixel resolution (3 stars), High quality (Hq)