Blaupunkt Verona C51 - Manual (Page 29)

58
External Audio Sources
In addition to the CD-changer, you can
also connect another external audio
source that has a line output. Such
sources include portable CD, MiniDisc
or MP3 players.
If no CD changer is installed, two exter-
nal sources can be connected.
The AUX input must be switched on in
the menu.
To connect an external audio source,
you need an adapter cable, available
from your authorised Blaupunkt dealer.
Switching AUX Input On / Off
➮
Press the MENU button
8
.
“MENU” appears in the display.
➮
Press the or button
:
until
“AUX-IN-1 OFF” or “AUX-IN-1 ON”
appears in the display.
For the second AUX input, the “1” is re-
placed by a “2”. If a CD changer is in-
stalled, “2” is the only option.
➮
Press the or button
:
to
switch AUX on or off.
➮
Press the MENU button
8
or OK
;
.
Note:
●
If the AUX input is switched on, it
can be selected via the CD•C but-
ton
?
.
TMC
TMC for Dynamic
Navigation Systems
TMC means “Traffic Message Channel”.
TMC is used to transmit traffic an-
nouncements digitally for use in route
planning by suitable navigation systems.
Your car radio has a TMC output that
can be connected to Blaupunkt naviga-
tion systems. Your Blaupunkt dealer can
tell you which navigation systems can
be used with your car radio.
If a navigation system is connected and
a TMC station is received, TMC will light
up in the display.
If dynamic route guidance is active, a
TMC station will be tuned in automati-
cally.
EXTERNAL AUDIO SOURCES