Blaupunkt Verona C51 - Manual (Page 19)

48
Resetting the Tape Counter
To reset the tape counter
➮
Press button 5 MIX
>
.
Fast Winding
Fast forward
➮
Press the button
:
.
“FORWARD” appears in the display.
Fast rewind
➮
Press the button
:
.
“REWIND” appears in the display.
Stopping fast winding
➮
Press the OK button
;
.
Play continues.
Note:
●
While the tape is being fast wound,
the last radio station tuned in can
be listened to. This requires the
“Radio monitor” function to be
switched on.
Pausing During Play
To interrupt tape play
➮
Press button 3
>
.
Play is interrupted and “PAUSE” appears
in the display.
➮
Press button 3
>
again to
resume play.
Switching the Radio Monitor
On / off
➮
Press the MENU button
8
.
➮
Press the or button
:
until
“RM ON” or “RM OFF” appears in
the display.
➮
Press the or button
:
to
switch the radio monitor on or off.
➮
Press the MENU button
8
or OK
;
.
Skipping Blank Tape
You can automatically skip sections of
blank tape that last longer than 10 sec-
onds. This requires the blank skip func-
tion to be activated.
Switching Blank Skip On / Off
➮
Press the MENU button
8
.
➮
Press the or button
:
until
“BLANK SKIP” appears in the dis-
play.
➮
Press the or button
:
to
switch the blank skip function on or
off.
➮
Press the MENU button
8
or OK
;
twice.
Selecting Tape Type
If you are playing a “Metal” or “CrO
2
”
tape, you should set the tape type se-
lector to “MTL ON”.
To select the tape type
➮
Press button 1 MTL
>
.
Either “MTL ON” or “MTL OFF” will ap-
pear briefly in the display.
CASSETTE OPERATION