Braun NL Series - Manual (Page 20)

Page 18
Lift Features (continued)
Inner Roll Stop
Fully-Deployed
(vertical)
Inner
Roll Stop
The inner roll stop must
overlap the base plate a
minimum 1/2".
Fully-Unfolded
(horizontal)
Inner Roll Stop
(bridging position)
Operation Notes and Details
Inner Roll Stop: NL Series lift
models are equipped with an
automatic inner roll stop that
also serves as the bridge plate
(inner roll stop photos below).
When the UNFOLD switch is
pressed and the platform unfolds
IURPVWRZSRVLWLRQWRÁRRUOHYHO
this mechanical roll stop is auto-
matically deployed to the bridging
(horizontal) position to provide a
bridge plate between the platform
and the lift base plate (vehicle
ÁRRU7KHLQERDUGHGJHRIWKH
bridge plate rests on the threshold
warning plate (base plate). The roll stop automatically folds
(rotates) to the vertical (roll stop)
position when the platform lowers
to the ground (DOWN switch is
pressed).
As the UP switch is pressed and
the platform raises from ground
level, the inner roll stop automati-
cally unfolds (rotates) to the