beautypg.com

Behringer EURORACK MX802A User Manual

Page 7

background image

13

EURORACK MX802A

Phantom power (+48 V DC) is provided. This can be switched on or off by the +48 V phantom switch

.

+

Care should be taken NOT to plug mics into the console (or stagebox) while the phantom

power is on. Also, mute the monitor/PA speakers when turning phantom power on or off.

Allow the system to adjust for a couple of seconds after engaging phantom power before

setting input gains.

If possible, connect the unit to other devices in a balanced configuration to allow for maximum interference

immunity.

Unbalanced use of
mono 1/4" jack plugs