WORX WU381 18V 2.6 Ah Lithium Ion SDS Plus Cordless Rotary Hammer Drill - Manual (Page 7)

7
Technical data
Type wU381 wU381.9 (380-399 designation of machinery,
representative of cordless Rotary Hammer)
Model No. wU381 wU381.9
Voltage 18V
No load speed 0-1050rpm
Impact rate 0-4600bpm
Impact energy 2.0J
Battery type Li-Ion Powershare (WA3522)
Charger time 45min --------------
Battery capacity 2.6 Ah Li-Ion --------------
Battery pack quantity 2 --------------
Max. drilling
capacity
Steel 13mm
Wood 26mm
Masonry 20mm
Machine weight (without
battery)
2.7kg
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Noise and vibration data
When tested at hammer & drill mode L
pA
:87dB(A)
When tested at hammer & drill mode L
wA
:98dB(A)
3dB considered for hammer & drill mode in guaranteed value
Wear ear protection when sound pressure is over
80dB(A)
Vibration total values (triax vector sum) determined according to
EN 60745:
Hammer drilling into
concrete
Vibration emission value
a
h,HD
= 13.32m/s 2
Uncertainty K = 1.5m/s²
Chiselling
Vibration emission value
a
h,CHeq
= 14.70m/s 2
Uncertainty K = 1.5m/s²
warning: The vibration emission value during actual use of the
power tool can differ from the declared value depending on the ways
in which the tool is used dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and
in good condition.
The tightness of the grip on the handles and if any anti vibration
accessories are used.
And the tool is being used as intended by its design and these
instructions.
•
•
•