Maintenance, Replacement parts list – Wood’s Powr-Grip EO9RP User Manual
Page 6

Rev 0.0/5-14
4
EO9RP-DVS: #35198AFT
MAINTENANCE
When performing inspections and tests as directed in the lifter's instruction manual, be sure to
include all parts of the Movable Control Pendant whenever applicable, with special attention to
the following:
• When performing inspections of lifter controls as directed under the I
NSPECTION
S
CHEDULE
, check
the pendant cord connectors and strain relief for correct attachment. Also check the pendant
cord for any damage, including abrasions, kinks, cuts, and cord stress resulting from an
improperly functioning strain relief.
• When performing tests of lifter controls as directed under the T
ESTING
S
CHEDULE
, verify each of
the control functions available at the Movable Control Pendant.
Correct any deficiency before resuming normal use of the Movable Control Pendant. If
necessary, contact Wood’s Powr-Grip or an authorized dealer for assistance.
Note: One or more wiring diagrams may be provided in the final section of this
INSTRUCTIONS
manual for reference when servicing the Movable Control Pendant or trouble-shooting a
deficiency.
REPLACEMENT PARTS LIST
Stock No. Description
Qty.
66474AM
3/16" Oval Threaded Connector (for fastening strain relief cables)
2
59040
10 ft [3 m] Multi-Conductor Electrical Cord Extension with Strain Relief Extension (option)
1
10609
10-32 x 1/4" Socket Set Screw (for attaching strain relief bracket)
2
SERVICE ONLY WITH IDENTICAL REPLACEMENT PARTS
SUPPLIED BY OR APPROVED BY WOOD'S POWR-GRIP CO., INC.