Wood’s Powr-Grip EO9RP - Manual (Page 3)

Rev 0.0/5-14 1 EO9RP-DVS: #35198AFT
SPECIFICATIONS
Model Number: EO9RP
Description:
This Movable Control Pendant is specially designed for DC-powered vacuum
lifters that are equipped with a dual vacuum system. An electrical cord
enables the operator to remain outside the load's path while retaining access
to vacuum controls for attaching and releasing the load. Pendant cords are
also available in lengths suitable for installing windows and other construction
materials in multi-story buildings. A two-button release system complies with
CE Standard EN 13155.
Cord Length: 10 ft [3 m] (20 ft [6 m] with optional extension)
Option Weight: 9 lbs [4 kg] (15 lbs [7 kg] with optional extension)
Note: Make sure to add the weight of all options to the Lifter Weight when
you are selecting appropriate hoisting equipment (see ASSEMBLY in lifter's
instruction manual).
WARNINGS
Powr-Grip is pleased to offer the most reliable materials handling products available.
Despite the high degree of security provided by the Movable Control Pendant,
certain precautions must be observed to protect the lifter operator and others.
Never use a Movable Control Pendant that is damaged, malfunctioning, or missing parts (see
MAINTENANCE).
Never use the Movable Control Pendant to operate the lifter unless there is clear communication
about intended actions (eg, releasing load) with all personnel near the lift.
Always verify the status of the lifter and load visually prior to operating the lifter from a
distance.
Never disconnect the Movable Control Pendant during lifter operation.
Never touch the vacuum release controls during a lift. This may result in loss of vacuum and
release of the load.
Never lift a load higher than necessary or leave suspended loads unattended.
Never lift a load over people.
Always keep other personnel far enough away from the lifter to avoid injury in the event of an
unexpected load release.
Never make any modifications to the Movable Control Pendant (see LIMITED WARRANTY)