Wood’s Powr-Grip EO1DCB - Manual (Page 4)

Rev 10.0/9-13 2 EO1DCB: #35191AFT
OPERATING FEATURES
Note: Components featured in the following instructions for installing, using or maintaining the
DC Vacuum Back-Up System are underlined on their first appearance in each section.
FIGURE 1: Back-Up System with Local Power Switch
FIGURE 2: Back-Up System with Remote Power Switch
1 VACUUM HOSE FITTING 3 BATTERY TEST BUTTON 5 BATTERY GAUGE
2 POWER SWITCH (FIG. 1) OR
ELECTRICAL CONNECTOR (FIG. 2)
4 BATTERY CHARGER 6 Enclosure with BATTERY,
VACUUM PUMP and VACUUM
SWITCH