Wood’s Powr-Grip CF11PTEAO - Manual (Page 6)

Rev 0.0/3-11 4 CF11PTEAO: #35190AFT
OPERATION
When evaluating the intended use as directed in the OPERATION section of the PT10 lifter's
instruction manual (see B
EFORE
U
SING THE
L
IFTER
), be sure to consider the Adjusted Pad Spread
indicated in the SPECIFICATIONS above.
Before applying the lifter to a load, make sure that the vacuum pads are positioned to support
the load correctly. Vacuum pads must be arranged symmetrically, to keep the lifter balanced.
Make sure that all pads will fit entirely on the contact surface and will be loaded evenly while
lifting (see SPECIFICATIONS: Per-Pad Load Capacity in lifter instructions). Otherwise, operate
the lifter as directed in the OPERATION section of the PT10 lifter's instruction manual.
MAINTENANCE
When performing inspections and tests as directed in the MAINTENANCE section of the PT10
lifter's instruction manual, be sure to include all parts of the Pad Frame Extension Arms whenever
applicable.
REPLACEMENT PARTS LIST
Stock No. Description Qty.
49190 End Plug - 2 1/2" x 3 1/2" x 1/4" [63.5 mm x 88.9 mm x 6.4 mm] Tubing Size 4
13532 Cotterless Hitch Pin - 1/2" x 4" [13 mm x 102 mm] 4
SERVICE ONLY WITH IDENTICAL REPLACEMENT PARTS
SUPPLIED BY OR APPROVED BY WOOD'S POWR-GRIP CO., INC.