Wood’s Powr-Grip MR1611LDCO - Manual (Page 5)

Rev 1.0/3-13 3 MR1611LDCO/DVS: #35048
OPERATING FEATURES
Note: Components featured in the following instructions for assembling, operating or
maintaining the vacuum lifter are underlined on their first appearance in each section.
Standard MR1611LDC shown with Dual Vacuum System
and Remote Control System options.
1 LIFT BAIL 13 DUAL VACUUM SYSTEM VALVE ASSEMBLY
2 LIFT BAR 14 POWER SWITCH
3 LIFT BAR EXTENSION 15 VACUUM GAUGES
4 RADIO TRANSMITTER (RC option) 16 VACUUM PAD
5 CENTER SECTION of PAD FRAME 17 REMOVABLE SECTION of PAD FRAME
6 RADIO RECIEVER (RC option) 18 ROTATING PAD ARM Detail of DVS VALVE ASSEMBLY
7 VACUUM LIFT LIGHT (RC option) 19 REMOVABLE PAD ARM
8 LOW VACUUM WARNING BUZZER 20 AIR FILTERS
9 REMOTE CONTROL ENCLOSURE 21 ROTATION RELEASE LEVER 25 BATTERY GAUGE
(RC option) 22 BATTERY CHARGER 26 VACUUM LOSS WARNING BUZZER
10 STROBE LIGHT (RC option) 23 INSTRUCTION CANISTER (option)
11 VACUUM RESERVE TANK 24 Enclosure with VACUUM PUMP 27 Enclosure with BATTERY
12 QUICK CONNECTOR and VACUUM SWITCH 28 BATTERY TEST BUTTON