Wood’s Powr-Grip MRPT89AC User Manual

Page 9

Rev 30.0/6-13

MRPT-AC: #35060

Note: Some hoisting equipment hooks could interfere with an upright load that extends

beyond the lifter's pad frame. If the load would contact the hook during lifter operation, the
operator must prevent this by attaching a sling (or other rigging that does not interfere with

the load) between the hook and the lift bail.

WARNING: Any sling used must be rated to carry maximum load weight plus

lifter weight.

A hoist control pendant can be attached to the lifter by inserting it into the pendant basket

provided. Remove the pad covers and save them for use whenever the lifter is stored. Now
the lifter is operational.

4) If the lifter is equipped with one or more pad frame options, arrange the pad frame in the

configuration that will provide optimal support of the load while lifting (see P

RAME

PTIONS

to follow). See separate instructions to assemble and employ the pad frame.

5) Perform Operational and Load Tests for the lifter as directed in MAINTENANCE: T

ESTING

CHEDULE