Cleaning – Wolo 7900 SERIES Lookout User Manual
Page 5
pattern in use will display on the switch controller’s flash pattern indicator.
• To turn on traffic advisory: press the switch button TRAFFIC FLASH.
• Select the traffic advisory light pattern by using the THREE ARROWS.
• To turn off traffic advisory: press the switch button TRAFFIC FLASH until you hear a beep.
Warning light: There are Sixteen-(16) selectable warning light patterns to choose from. The pattern in
use will display on the switch controller’s flash pattern indicator.
• To turn on the warning light: press the switch button FULL FLASH.
• Select the warning light pattern by using the two DIAMOND ARROWS.
• To turn off the warning light: press the switch button FULL FLASH until you hear a beep.
Alley Lights: There is a powerful alley light on each corner of the light bar. The alley light in use will
display on the switch controller’s flash pattern indicator.
• To turn on tthe alley light: press the switch button LEFT ALLEY or RIGHT ALLEY.
• To turn off the alley light: press the switch button LEFT ALLEY or RIGHT ALLEY until you hear a
beep.
Take Down Lights: There is a powerful take down light located in the front center
section of the light bar. The take down light in use will display on the switch controller’s
flash pattern indicator.
• To turn on the take down light: press the switch button TAKE DOWN.
• To turn off the take down light: press the switch button TAKE DOWN until you hear a beep.
CLEANING
A scratched, dull or dirty lens can cause a reduction in brightness of warning light. Never use a caustic
or petroleum based cleaner on any surface of the warning light. For best cleaning results, always use
household glass cleaner or mild soap with a soft lint free rag. If the lens has scratches, or is dull, it is
recommended those components be replaced to ensure maximum brightness of the warning light.
Warranty
Wolo Manufacturing Corporation (“Wolo”) warranties to the original purchaser, for twelve months from the date of purchase, that
this product is free from defects in workmanship and materials. If there is such a proven defect, Wolo, at its option, will either
repair or replace the item free of charge, if it is returned to Wolo within twelve months from the date of purchase together with
proof of purchase as described below. Wolo reserves the right to inspect any defect prior to settling any warranty claim by repair
or replacement. This warranty is limited as above provided and Wolo will not be responsible for fire or other casualty or accident,
due to neglect, abuse, abnormal use, modifications, faulty installation of this product, or natural causes.
ANY EXPRESSED WARRANTY NOT PROVIDED HEREIN IS EXCLUDED AND DISCLAIMED. THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO A TERM OF TWELVE (12) MONTHS.
UNDER NO CIRCUMSTANCES SHALL WOLO BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY SPECIAL OR
CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH OF WARRANTY OR OTHERWISE.
To obtain warranty service, return the product prepaid, and include the original bill of sale showing the date of purchase. Provide with the
return a brief description of the problem with a daytime telephone number. Also, include with the return a check or money order in the amount
of $20.00 to cover return shipping. Mail to:
Wolo Manufacturing Corp.
Attn: Warranty Service
One Saxwood Street
Deer Park, NY 11729
E-mail: [email protected]
© 2011 Wolo Mfg. Corp
All Rights Reserved.
pattern in use will display on the switch controller’s flash pattern indicator.
• To turn on traffic advisory: press the switch button TRAFFIC FLASH.
• Select the traffic advisory light pattern by using the THREE ARROWS.
• To turn off traffic advisory: press the switch button TRAFFIC FLASH until you hear a beep.
Warning light: There are Sixteen-(16) selectable warning light patterns to choose from. The pattern in
use will display on the switch controller’s flash pattern indicator.
• To turn on the warning light: press the switch button FULL FLASH.
• Select the warning light pattern by using the two DIAMOND ARROWS.
• To turn off the warning light: press the switch button FULL FLASH until you hear a beep.
Alley Lights: There is a powerful alley light on each corner of the light bar. The alley light in use will
display on the switch controller’s flash pattern indicator.
• To turn on tthe alley light: press the switch button LEFT ALLEY or RIGHT ALLEY.
• To turn off the alley light: press the switch button LEFT ALLEY or RIGHT ALLEY until you hear a
beep.
Take Down Lights: There is a powerful take down light located in the front center
section of the light bar. The take down light in use will display on the switch controller’s
flash pattern indicator.
• To turn on the take down light: press the switch button TAKE DOWN.
• To turn off the take down light: press the switch button TAKE DOWN until you hear a beep.
CLEANING
A scratched, dull or dirty lens can cause a reduction in brightness of warning light. Never use a caustic
or petroleum based cleaner on any surface of the warning light. For best cleaning results, always use
household glass cleaner or mild soap with a soft lint free rag. If the lens has scratches, or is dull, it is
recommended those components be replaced to ensure maximum brightness of the warning light.
Warranty
Wolo Manufacturing Corporation (“Wolo”) warranties to the original purchaser, for twelve months from the date of purchase, that
this product is free from defects in workmanship and materials. If there is such a proven defect, Wolo, at its option, will either
repair or replace the item free of charge, if it is returned to Wolo within twelve months from the date of purchase together with
proof of purchase as described below. Wolo reserves the right to inspect any defect prior to settling any warranty claim by repair
or replacement. This warranty is limited as above provided and Wolo will not be responsible for fire or other casualty or accident,
due to neglect, abuse, abnormal use, modifications, faulty installation of this product, or natural causes.
ANY EXPRESSED WARRANTY NOT PROVIDED HEREIN IS EXCLUDED AND DISCLAIMED. THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO A TERM OF TWELVE (12) MONTHS.
UNDER NO CIRCUMSTANCES SHALL WOLO BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY SPECIAL OR
CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH OF WARRANTY OR OTHERWISE.
To obtain warranty service, return the product prepaid, and include the original bill of sale showing the date of purchase. Provide with the
return a brief description of the problem with a daytime telephone number. Also, include with the return a check or money order in the amount
of $20.00 to cover return shipping. Mail to:
Wolo Manufacturing Corp.
Attn: Warranty Service
One Saxwood Street
Deer Park, NY 11729
E-mail: [email protected]
© 2011 Wolo Mfg. Corp
All Rights Reserved.
pattern in use will display on the switch controller’s flash pattern indicator.
• To turn on traffic advisory: press the switch button TRAFFIC FLASH.
• Select the traffic advisory light pattern by using the THREE ARROWS.
• To turn off traffic advisory: press the switch button TRAFFIC FLASH until you hear a beep.
Warning light: There are Sixteen-(16) selectable warning light patterns to choose from. The pattern in
use will display on the switch controller’s flash pattern indicator.
• To turn on the warning light: press the switch button FULL FLASH.
• Select the warning light pattern by using the two DIAMOND ARROWS.
• To turn off the warning light: press the switch button FULL FLASH until you hear a beep.
Alley Lights: There is a powerful alley light on each corner of the light bar. The alley light in use will
display on the switch controller’s flash pattern indicator.
• To turn on tthe alley light: press the switch button LEFT ALLEY or RIGHT ALLEY.
• To turn off the alley light: press the switch button LEFT ALLEY or RIGHT ALLEY until you hear a
beep.
Take Down Lights: There is a powerful take down light located in the front center
section of the light bar. The take down light in use will display on the switch controller’s
flash pattern indicator.
• To turn on the take down light: press the switch button TAKE DOWN.
• To turn off the take down light: press the switch button TAKE DOWN until you hear a beep.
CLEANING
A scratched, dull or dirty lens can cause a reduction in brightness of warning light. Never use a caustic
or petroleum based cleaner on any surface of the warning light. For best cleaning results, always use
household glass cleaner or mild soap with a soft lint free rag. If the lens has scratches, or is dull, it is
recommended those components be replaced to ensure maximum brightness of the warning light.
Warranty
Wolo Manufacturing Corporation (“Wolo”) warranties to the original purchaser, for twelve months from the date of purchase, that
this product is free from defects in workmanship and materials. If there is such a proven defect, Wolo, at its option, will either
repair or replace the item free of charge, if it is returned to Wolo within twelve months from the date of purchase together with
proof of purchase as described below. Wolo reserves the right to inspect any defect prior to settling any warranty claim by repair
or replacement. This warranty is limited as above provided and Wolo will not be responsible for fire or other casualty or accident,
due to neglect, abuse, abnormal use, modifications, faulty installation of this product, or natural causes.
ANY EXPRESSED WARRANTY NOT PROVIDED HEREIN IS EXCLUDED AND DISCLAIMED. THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO A TERM OF TWELVE (12) MONTHS.
UNDER NO CIRCUMSTANCES SHALL WOLO BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY SPECIAL OR
CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH OF WARRANTY OR OTHERWISE.
To obtain warranty service, return the product prepaid, and include the original bill of sale showing the date of purchase. Provide with the
return a brief description of the problem with a daytime telephone number. Also, include with the return a check or money order in the amount
of $20.00 to cover return shipping. Mail to:
Wolo Manufacturing Corp.
Attn: Warranty Service
One Saxwood Street
Deer Park, NY 11729
E-mail: [email protected]
© 2011 Wolo Mfg. Corp
All Rights Reserved.
Alley Lights: There are three-(3) selectable alley light patterns to choose from.
The alley light in use
will display on the switch controller’s flash pattern indicator.
• To turn on the alley light STEADY: press and release
the switch button LEFT ALLEY or RIGHT ALLEY
one time fast
.
•To turn on the alley light with a DOUBLE FLASH: press and release the switch button LEFT ALLEY
or RIGHT ALLEY twice fast.
•To turn on the alley light with an ON/OFF FLASH: press and release the switch button LEFT ALLEY
or RIGHT ALLEY three times fast.
• To turn off the alley light: press the switch button LEFT ALLEY or RIGHT ALLEY until you hear a beep.
Take Down Lights: There are three-(3) selectable take down light patterns to choose from. The take
down light in use will display on the switch controller’s flash pattern indicator.
• To turn on the take down light STEADY: press and release the switch button TAKE DOWN one
time fast.
•To turn on the take down light with a DOUBLE FLASH: press and release the switch button
TAKE DOWN twice fast.
•To turn on the take down light with an ON/OFF FLASH: press and release the switch button
TAKE DOWN three times fast.
• To turn off the take down light: press the switch button TAKE DOWN until you hear a beep.