Quick – BenQ MP624 User Manual
Page 46
Operation
46
FUNCTION
(default setting/
value)
DESCRIPTION
(default setting/value)
Panel Key
Lock
(Off)
Disables or enables all panel key functions except
Power on the
projector and keys on the remote control. See
for details.
Sleep Timer
(Disable)
Sets the auto-shutdown timer. The timer can be set to a value between
30 minutes and 12 hours.
Splash Screen
(BenQ logo)
Allows you to select which logo screen will display during projector
start-up. Three options are available: BenQ logo, Black screen, or Blue
screen.
Quick Cooling
(Off)
Selecting On enables the function and the projector cooling time will
be shortened to a few seconds.
If you attempt to restart the projector right after the quick cooling
process, it may not be turned on successfully and will rerun its
cooling fans.
High Altitude
Mode
(Off)
A mode for operation in high altitude areas. See
altitude environment" on page 39
for details.
Audio Settings
Mute (Off)
Volume (5)
Power on/off ring tone (On)
"Adjusting the sound" on page 39
for details.
Menu Settings
Menu display time (15 sec)
Sets the length of time the OSD will remain active after your last key
press. The range is from 5 to 30 seconds in 5-second increments.
Menu position (Center)
Sets the On-Screen Display (OSD) menu position.
Standby D-
Sub Output
(Off)
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the D-SUB IN and D-SUB OUT
sockets are correctly connected to devices. See
for how to make the connection.
Enabling this function slightly increases the standby power
consumption.
4. S
YSTEM
SETUP:
Basic menu
I
I
5.
SYSTEM SETUP: Ad
vanced menu