Western Digital My Book Pro Edition II Quick Install Guide - Manual (Page 3)

My Book Pro Edition II | 2
Installing the Drive
Macintosh
1. Turn on your computer.
2. Insert the software CD into the CD-ROM drive.
3. Double-click the CD-ROM drive icon, the My Book drive icon, then the Mac folder, which contains the
software for this device.
4. Double-click My Book RAID Manager to install this program into the Applications folder.
5. WD Button Manager Software disk image contains the installer required to enable the capacity gauge and
Safe Shutdown ™ . Double-click this icon to install the program into the Applications folder.
6. If you want to install the backup software now, double-click the EMC ® Retrospect ® Express icon in the Mac
folder and follow the instructions as prompted.
7. Connect the unit’s power cord and interface cable (USB, FireWire 800, or FireWire 400) as shown, after
which the unit mounts to the system.
My Book is now ready for use. For further information on this product including drive features, utilities, RAID
configuration, drive replacement, and troubleshooting, refer to the user manual provided on the CD.
QIG_ProII.book Page 2 Thursday, November 2, 2006 1:48 PM