Managing the raid configuration, Checking the device status – Western Digital My Book VelociRaptor Duo User Manual User Manual
Page 16

MY BOOK VELOCIRAPTOR DUO
USER MANUAL
MANAGING AND CUSTOMIZING THE DEVICE
– 12
Managing the RAID Configuration
The initial/default configuration of your My Book VelociRaptor Duo device is as a striped
RAID 0 disk array for high-speed/maximum-storage performance. You can reconfigure
the device as either:
• A mirrored RAID 1 disk array for maximum-protection/reduced-storage
• JBOD individual drives that can be formatted differently for enhanced flexibility
Checking the Device Status
The WD Drive Utilities software provides a status indication of the device configuration
and each device drive.
To check the device status:
1.
Click Go > Applications > WD Drive Utilities to display the WD Drive Utilities screen
(see Figure 3 on page 9).
2.
If you have more than one supported storage device connected to your computer,
select the one that you want to check.
3.
Click RAID Management > Status to display the device status:
4.
The status display shows:
•
Current Configuration as either:
-
Stripe
-
Mirror
-
Individual Drives
•
RAID Status as either:
-
Online
-
Offline
-
Degraded
-
Failed
•
For RAID configurations, Drive A and Drive B Status as either:
-
Online—The drive is online and available
-
Failed—The drive has failed
-
Removed—The drive has been removed
-
Standby—The drive is part of the RAID array but needs to be rebuilt
-
Rebuilding—The drive is being rebuilt
-
Unknown—The drive has some other undetermined status