Waring Pro WC400 - Manual (Page 7)

7
Note: The non-slip foot may attach itself to the wine stopper.
In this case, hold the wine stopper and the neck of the bottle
securely in one hand and tilt the wine preserver away from the
wine stopper to break the suction. This should prevent air from
reentering the bottle. If in doubt, repeat the above operating
process.
Suggestion: For more than half a bottle of wine remaining, one
session should suffice. For less than half a bottle, we suggest you
follow the steps above a second time.
DATE INDICATORS
1. Use the arrow symbol to indicate the date when the bottle
was sealed with your wine preserver.
2. Gently swivel the silver ring to the left or right until the
correct date is in line with it.
TO OPEN A SEALED BOTTLE
• Firmly hold the bottle in one hand and gently ease the wine
stopper away from the bottle with the other hand.
• Store the wine stoppers in the charging base for the next time
that you need them.
AFTER USE
• We recommend that you return your appliance to the charging
base so that it is fully charged and available for use at any
time.
CLEANING & MAINTENANCE
Always unplug the appliance from the main outlet before cleaning.
Make sure all the parts are clean and dry before storing.
To clean housing, wipe with a clean, damp cloth.
Never immerse power adapter, charging base or housing in water
or any other liquids.
Never submerge the motor base in water or other liquids, or place
in a dishwasher.
Any other servicing should be performed by an authorized service
representative.