Waring Pro WO50B - Manual (Page 4)

5 6
1. Place the wine opener on top of the wine
bottle making sure that it remains as
straight/upright as possible at all times.
If you hold the wine opener at an angle
to the bottle it will not remove the cork
properly (see fig. 3).
2. Hold the wine opener firmly and depress the lower
part of the switch. The corkscrew spiral will turn in
a counterclockwise direction and enter the cork, then
gradually remove it from the bottle. When the
mechanism has stopped, the cork has been fully
removed from the bottle.
3. Lift the wine opener up and away from
the bottle. To remove the cork, depress
the upper part of the switch. The spiral will
turn in a clockwise direction and
release the cork (see fig 4).
4. Always return the wine opener to the charging base
when done. This will protect the unit while not in use.
TO OPERATE yOUR VACUUM PUMP
1. Place vacuum pump on top of the opened
wine bottle.
2. Press down on the top of the pump
approximately 20 times or until you feel
resistance.
3. Twist the top of the vacuum pump
to mark the seal date.
4. Store wine bottle in an upright position.
5. To remove vacuum pump from wine bottle,
simply pull straight up.
ClEANING AND MAINTENANCE
Always unplug the appliance from the electrical outlet before
cleaning.
To clean housing, wipe with a clean, damp cloth.
Never immerse power adapter, charging base or housing in water
or any other liquids.
Never place in a dishwasher.
Make sure all the parts are clean and dry before storing.
Any other servicing should be performed by an authorized service
representative.
AFTER USE
We recommend that you return your appliance to the charging
base so that it is fully charged and available for use at any time.
(fig 4)
(fig 3)